Have you chaps any idea why I'm not seeing any MQTT messages from my new V1.0 cricket? Info: I have an MQTT broker running on a Raspberry Pi, it receives messages from several 1st Gen Crickets, and
several ESP32 based micro-controllers without problem. I'm using
mosquitto_sub -d -t /+/+
to look for the messages, I expect this to work!
I've not seen a single message from the new Cricket. ( I have tried mosquitto_sub -d -t /+, mosquitto_sub -d -t /+/+/+)
Configuration of the new Cricket seems reasonably straight forward, I've selected
MQTT_CUSTOM, the IP Address of the RPi, and id/Password the same as I use for the original Crickets.
I have tried 192.168.1.112:1883 (IP with the port number), this has not helped
I've tried several access points. I've tried rtc_wakeup and io1_ wakeup, force updates are on for both, the blue light on the Cricket does flash when it attempts the send message(s). The Cricket is running from a LiFePO4 battery, I've measured this as 3.24V. Any suggestions are welcome.